Print Email

Chickahominy Falls

Chicka-what?

This is a new community that is being created and the first sign we made was something of a test.

My clients customer wanted to have the look of a monolithic slab of hewn sandstone and all that that entails but they also wanted the letters to  appear to have evolved out of the face and that meant having the same color on the sides as well as the face of the letters.. With an uneven textured face that would have been very difficult to keep it looking really sharp.

 

chickahominy test 1 320x240This was the first test we created; the letter has a hammered bronze finish.

Carving & Shaping

chickahominy 1 carve 320x240

chickahominy 1a carve 320x240

 

Because the face of the block wasn't smooth or level we decided that the best way to produce it was to create the face first and deal with the letters next. Once the sample was approved we cut two 10ft x 2ft x 2" slabs of HDU, and I proceded to carve the fracture lines.

 Between sanding carving and grinding it started to take on the look I wanted.

Next we took it to the sandblasting area and standing well away from the panel we sandblasted it very lightly just enough to texture the face

 

It was brought back in and placed on the CNC router where the shape of the letters were "hogged out" to a depth of 0.5".

 

 

chickahominy 2 rout 320x240

It was then returned to the sandblast area and final texturing was carried out (removing any unwanted tool marks etc).

chickahominy 1 sandblast 320x240

The individual letters were cut out with the router.

These are 1.5" deep so that once epoxied into the face they would protrude about 1".  (this photo just shows an "a" cut out )Chickahominy letter1200x1024

We needed to rout a place for the 2x2" aluminum sq. tube to be epoxied in, to support one end of the sign and to do that I had to make a template for the hand held router 

chickahominy 1 rout template 320x240

chickahominy 1 laser template 320x240

Normally I would have cut it with a jig saw or similar but now I was able to put a piece of 0.5" plywood into the laser and cut it out in about 35 seconds.

It made a great template:

 

 

 

Next we epoxied the 2" x 2" aluminum tube between the faces to make 1 - 4" thick sign slab

chickahominy 1 glued 320x240

The end plate was welded onto the tubes and painted 

chickahominy 2 320x240chickahominy 3 320x240

 

 




 

 

If this or any other sign we create appears to look a little overdone or exaggerated; consider this.

 Almost no one will ever view this sign the way you are looking at it right now. You are looking intently at it and the simple truth is that this sign will be read by:

  1. Folks who have never seen it before
  2. They will be driving, concentrating on the road, watching for the turning, watching other traffic , listening to the radio, or talking with their other haves.
  3. They will have their minds on a thousand different things  most won't even know what color it was. 

But they will know it looked like a large slab of stone. That's why we rarely paint a nice little picture on any sign. At 15 MPH it will become a grey blob, unrecognizable to everyone. We have to create a characterization of reality enough that it is instantly recognized whilst it is paid no attention what so ever.

chickahominy 1 320x240


Comments
(Please login/register to leave a comment)

Gallery

bottom collage Lauren 1a 364x168

Some of what we create on a regular basis

Signs we manufacture are used for but limited to: Business signs, shops signs, restaurant signs, condominium Signs, subdivision signs, golf course signs, street signs, housings development signs, salon signs, beauty parlor signs, real estate signs, commercial signs, industrial signs, house signs, farm signs, beach house signs, resort signs, traffic signs, hotel & inn signs, pub signs, vehicle signs, interior & ada signs, boat signs, truck signs, office signs professional signs, trail signs wall sign, entrance signs, lobby signs, street name signs, outdoor signs, custom signs, mall signs, retail signs , marina signs, architectural signs.

Connect with Us

This email address is being protected from spambots. You need JavaScript enabled to view it.

www.signblasters.com

Like Us on Facebook

Join Us on Googleplus

Youtube Channel

Customer Review 

Pine Cones of Pinehurst 

jackalope

Request a quote !

Don't have an account yet? Register Now!

Sign in to your account