Old Dominion Boat Club, Hand Carved Paddles and multi-layer routed dimensional signs
This was a great project to make we did it for Acorn Signs VA. The paddles were hand-carved and shaped from HDU with Aluminum tube and HDU water rings and ends.
The signs (there were 3 of them) were created from HDU and it took 22 tool paths to create the 7 layers that show the shape and depth of each of these signs (the OD and the end of the spokes were added), all the rest was either routed or carved from 1 piece.
The signs (there were 3 of them) were created from HDU and it took 22 tool paths to create the 7 layers that show the shape and depth of each of these signs (the OD and the end of the spokes were added. All the rest was either routed or carved from 1 piece.
Carved Paddles
Each of these routed and carved signs have 14 coats of paint and a clear coat so they should be good for a long time.
If you want to see more of our routed and carved dimensional signs look at our carved and routed page or the Carved / routed portfolio.