Victorian Style Cast Aluminum Lamp Posts, Street Signs, Mailboxes and Traffic Signs

 NB. We have access to a large range of designs and styles, if you don't see what you are looking for, give us a call we can probably get it.

We also work very closly with the foundry and we are capable of custom casting if the nubers are enough.

We will be adding new designs every month.

Wholesale pricing on these items as well as regular signage for HOAs'  POAs' and Property Management companies.

victoriana speed limit sign base finial fluted post sign backer classic signs nc 152x240 victorian-style-st-name-and-stop-sign-from-rear-classic-signs-nc small victoriana stop sign with finial base fluted post st signs 150x240
Fluted or smooth poles Street Signs on top or from the side. DOT standard signage in a frame or on a backer.
victorian-style-st-name-and-stop-sign-classic-signs-nc small mailbox front victorian style cast aluminum springa-hinge classic signs nc 180x240 mailbox victorian style cast aluminum springa-hinge classic signs nc 180x240
Cast solid poyester signs that look just like sandblasted redwood for a more personalized feel. Cast aluminum mail boxes with inteligent spring hinges. See below. Base, pole, finial, number plate, scroll bracket  (if needed)

Our "inteligent" door hinge alows the dor to stay open when opend (this keeps your mail delivery person happy) and when you start to close it, it will close on its own.

Depending on the quantity, these mail boxes cost between $240 and $435 installed, (your location may have an effect on the installation cost).

We have fluted or smooth round poles, as well as square and rectangular poles. from 5-15 feet in length. Anything that isn't made in the foundry we make in our own facility. This allows us to have a much greater latitude when it comes to custom work.

A recent addition to Signblasters.com is the availability of Victorian Style lamp posts, street signs, mailboxes (with newspaper slots if required) and attractive traffic signs. Please call us on 800 948 4307 for further information if you need any help in design, and of course for pricing and ordering.

There is also a range of more comtemporary street & trafffic signs Folow this link.

 

 

 

 

Talk to a Designer Now
1800 948 4307
8:30 - 5:30 pm EST.
Name
Enter your email
Telephone
Tell us about your project

 Help us prevent SPAM!
  
Every custom sandblasted sign, carved sign & routed sign we create is individually designed and made for you. You can request more information for your project using the form above. Or for fast personal service, call one of our designers.
1800 948 4307
 

Featured Sign of the Month

Uwharrie Point Country Club Main Entrance

This PVC Monument Sign is approx 8ft high by 14ft. wide and was originally made from Redwood. After approx 25 years it had rotted. The board of the residents association were very keen to keep the original appearance exactly the same as the original but they wanted it to be from a material that wouldn't rot.  We had access to  the original architects drawings, so we set about converting the plans into a computer file engineered to be made from PVC and aluminum but to look exactly like the original. Every piece of coving and molding was made in house, and then assembled into three pieces which were transported to the site where it was assembled. The whole monument sign was painted with six coats of a high quality Benjamin Moore latex paint ( it lasts longer on PVC than paints costing over $100 .00/gall more. Then apart from the center panel all of the monument was painted once more by brush and as it was drying the brushes were dragged carefully along the length of each section creating a wood grain effect; thus removing any appearance of the sign looking plastic.

uwharrie point entrance sign pvc monument classic signs nc 900x536