Edglit Signs

Edglit signs are a really attractive way of making a subtle and tasteful statement which give information but is easy on the eyes.

edgelit sign custom made 5ftx7ft with 300 high intensity leds to light it Classic signs NC 190x216This picture of this large edglit sign was taken after installation in a local medical office. They wanted to make a big statement but did not want it to form a physical barrier blocking part of the waiting room, so we suggested that they try an edglit sign, and explained to them that the light comes in from the sides and the top and is refracted by the sandblasted text, but the physical size of the sign left a lot of clear space, so it did not enclose any part of the waiting room but there is not a single person that enters that reception and doesn't see that sign.

Most edglit signs are no bigger than 36 ins. in one dimension, because light doesn't like to travel too far inside glass or acrylic. However as you can clearly see here we can make it work in a five foot by seven foot piece. It gets a lot of attention and looks very .... well, what can I say? it works! The frames can be designed to fit any decor, traditional or contemporary. This one has both.

 

 

Talk to a Designer Now
1800 948 4307
8:30 - 5:30 pm EST.
Name
Enter your email
Telephone
Tell us about your project

 Help us prevent SPAM!
  
Every custom sandblasted sign, carved sign & routed sign we create is individually designed and made for you. You can request more information for your project using the form above. Or for fast personal service, call one of our designers.
1800 948 4307
 

Featured Sign of the Month

Uwharrie Point Country Club Main Entrance

This PVC Monument Sign is approx 8ft high by 14ft. wide and was originally made from Redwood. After approx 25 years it had rotted. The board of the residents association were very keen to keep the original appearance exactly the same as the original but they wanted it to be from a material that wouldn't rot.  We had access to  the original architects drawings, so we set about converting the plans into a computer file engineered to be made from PVC and aluminum but to look exactly like the original. Every piece of coving and molding was made in house, and then assembled into three pieces which were transported to the site where it was assembled. The whole monument sign was painted with six coats of a high quality Benjamin Moore latex paint ( it lasts longer on PVC than paints costing over $100 .00/gall more. Then apart from the center panel all of the monument was painted once more by brush and as it was drying the brushes were dragged carefully along the length of each section creating a wood grain effect; thus removing any appearance of the sign looking plastic.

uwharrie point entrance sign pvc monument classic signs nc 900x536