Lobby and Reception Signs

Custom Letters, custom logos, for receptions, lobbies and waiting areas

skin care custom cut mirror finish letters from classic signs nc 220x161The lobby or entrance hall of a business, school or other facility is a fitting place for your organizations id sign, the name of the company or facility in the reception area lets visitors know they have arrived and reinforces the corporate identity in the visitor's mind.

clarke phiffer custom gold interior letters classic signs nc 220x165

 

 

These signs often consist of (or have the appearance of) metal letters, custom cut logos, organization emblems, sandblasted signs, routed or carved logos or a myriad of other possibilities. The Spa is a mirror finish silver and the Clarke is a brushed brass/gold; both look very professional.

 

 

edgelit sign custom made 5ftx7ft with 300 high intensity leds to light it Classic signs NC 190x216One of our specialties is creating large edglit reception signs

Most edglit signs are no bigger than 36 ins. in one dimension, because light doesn't like to travel too far inside glass or acrylic. However as you can clearly see here we can make it work in a five foot by seven foot piece. It gets a lot of attention and looks very .... it works. The frames can be designed to fit any decor, traditional or contemporary. This one has both.

There are many other types of entrance, reception and lobby signs and we can create or design and create anything you require, from a ground sign directing people to the area they are looking for, to interchangeable company directories call us and Classic Signs will help you design the perfect sign for your lobby and reception area.

wachovia brass faced custom letters classic signs nc 220x100JPG

Talk to a Designer Now
1800 948 4307
8:30 - 5:30 pm EST.
Name
Enter your email
Telephone
Tell us about your project

 Help us prevent SPAM!
  
Every custom sandblasted sign, carved sign & routed sign we create is individually designed and made for you. You can request more information for your project using the form above. Or for fast personal service, call one of our designers.
1800 948 4307
 

Featured Sign of the Month

Uwharrie Point Country Club Main Entrance

This PVC Monument Sign is approx 8ft high by 14ft. wide and was originally made from Redwood. After approx 25 years it had rotted. The board of the residents association were very keen to keep the original appearance exactly the same as the original but they wanted it to be from a material that wouldn't rot.  We had access to  the original architects drawings, so we set about converting the plans into a computer file engineered to be made from PVC and aluminum but to look exactly like the original. Every piece of coving and molding was made in house, and then assembled into three pieces which were transported to the site where it was assembled. The whole monument sign was painted with six coats of a high quality Benjamin Moore latex paint ( it lasts longer on PVC than paints costing over $100 .00/gall more. Then apart from the center panel all of the monument was painted once more by brush and as it was drying the brushes were dragged carefully along the length of each section creating a wood grain effect; thus removing any appearance of the sign looking plastic.

uwharrie point entrance sign pvc monument classic signs nc 900x536