City Signs and Town Signs

City and Town Signs
city_entrance_sign_monument_calvert_city_classic_signs_nc_320x240.jpgCity and Town signs are available in many different substrates.  We specialize in Town, City and Community signs and can help you with design and materials for any type of sign you may be interested in. Some of our sandblasted look signs can be made to be extremely vandal resistant without losing any of their rustic looks and feel. If this is what you are interested in, please call us for details on 800 948 4307.
Manufactured by: Classic Signs and Signblasters, an award winning family company serving the Eastern coast of the USA and the Caribbean.

As you can see in the photos above, we design and manufacture all kinds of City signs and Town signs, including signs for community centers, parks, city offices etc.

community_entrance_sign_whispering_pines_large_3dimensional_classic_signs_nc_210x280.jpg

We will focus on the town and city welcome entrance signs lower down this page as they are a very important part of any city's public image.

First though I want to talk about our super strong hurricane and vandal resistant signage.

southern pines park cast polyester Vandal resistant supertough sign classic signs nc 200x124

 

If you are having damage or vandal problems follow this link to read about our solid polyester signage. The Town of Southern Pines was having a lot of damage from vandals about 12 years ago and needed something different, but they didn't want to change the look of their signs, we suggested making a mold and producing some of our super tough signs.

The Douglass sign above and Nick's Creek to the left are two of about 10 signs we have made them for various uses over the years. Since then they have only lost 1 sign; a large truck ran over it ! These signs can emulate whatever was used for the original. So if you want the look of sandblasted redwood we can do that. Not only that, but they will actually cost less than real old growth vertical grain redwood. Please note: because we make a mold and cast the signblanks, it is only cost effective with multiples. We don't want to mislead you into thinking it is less expensive when producing just 1 or 2 signs.

Want to see how strong they are

City,Town Welcome and Entrance Signs.town_of_jesup_classic_signs_nc_300x169.jpg

For residents and visitors alike a well designed and readable sign is a welcome sight. Town, City and Commuunity signs define limits of the area and welcome residents, new visitors and prospective businesses alike.

pinehurst village town sign custom sandblasted hdu-stone finish classic signs nc 200x140The signs should be pleasing to the eye but at the same time be clear and legible. In smaller towns and cities they are often less formal, but still need to be pleasant and distinctive. A visitor should be able to absorb the content of your sign at 50 MPH on a dark and rainy night, because that's who they are really meant to help. Lets face it once you have read a sign you rarely give it more than a cursory look again.

In this site I often refer to C C L ...CLARITY CONTRAST LEGIBILITY

It doesn't make much difference to you, who pass the sign every day, but it makes a big difference to people new to your area.

We are very proud of the craftsmanship that went into the sign to the right and up. 

sandblasted-hdu-sign-molded in 4pcs cast in solid polyester very hard reidsville city seal classic signs nc side 220x214When traveling, people look for signs for confirmation of where they are, even in these days of GPS.

Why not make it more appealing to travelers who may want to stop for a while?

Below is a city sign designed to fit the 29ft. diameter curved wall of a traffic circle.

Classic Signs can design your City or Town sign incorporating beautiful design (yours or ours), and/or your seal into a professionally made welcome signreidsville city sandblasted curved hdu sign tofit curved wall classic signs nc 300x169.

 

 

Please take a look at our gallery of City and Town signs. If you are looking for a sign for your City or Town, please call us and our very experienced designers will do everything they can to help you design the perfect sign for your City or Town, including suggestions of various substrates the sign can be made from.

 

 

Talk to a Designer Now
1800 948 4307
8:30 - 5:30 pm EST.
Name
Enter your email
Telephone
Tell us about your project

 Help us prevent SPAM!
  
Every custom sandblasted sign, carved sign & routed sign we create is individually designed and made for you. You can request more information for your project using the form above. Or for fast personal service, call one of our designers.
1800 948 4307
 

Featured Sign of the Month

Uwharrie Point Country Club Main Entrance

This PVC Monument Sign is approx 8ft high by 14ft. wide and was originally made from Redwood. After approx 25 years it had rotted. The board of the residents association were very keen to keep the original appearance exactly the same as the original but they wanted it to be from a material that wouldn't rot.  We had access to  the original architects drawings, so we set about converting the plans into a computer file engineered to be made from PVC and aluminum but to look exactly like the original. Every piece of coving and molding was made in house, and then assembled into three pieces which were transported to the site where it was assembled. The whole monument sign was painted with six coats of a high quality Benjamin Moore latex paint ( it lasts longer on PVC than paints costing over $100 .00/gall more. Then apart from the center panel all of the monument was painted once more by brush and as it was drying the brushes were dragged carefully along the length of each section creating a wood grain effect; thus removing any appearance of the sign looking plastic.

uwharrie point entrance sign pvc monument classic signs nc 900x536