Church Signs

Church Signs
From handcrafted traditional Church signs, to modern internally lit changeable letter and programmable signs.

Of course, there are as many types of Church sign as there are types of Churches.

On this page we will show a few of the Church signs that we have manufactured and list some of the materials that they are manufactured from.

We specialize in helping congregations all over the USA design church signs that are at once noticable in their uniqueness, (and therefore memorable) welcoming, attractive, easy to read (very important), and long lasting. We use materials that will last a very long time, not just for our church signs but for every dimensional we produce.

Call one of our church sign designers and start the design process making your ideas a reality

Also lower down the page there is a link to our Church sign photo gallery which may also help in finding what you are looking for.

 

There are several church sign photographs in the sliding gallery at the top of the page

  • 1st Baptist Church sign is prismatic gold leaf letters on a brick monument.
  • The Bethesda Church sign is an HDU double faced sign, with appliqued prismatic letters on an internal steel skeleton supported by two brick columns, it measures approx 8x9 ft.
  • Wat MungMe Srisuk Buddhist Church sign. Double faced sandblasted HDU sign between custom made columns.
  • Village Chapel Church sign is a custom made hdu colonial style monument with sandblasted faces.
  • Roseland is an internally lit cabinet with changeable copy and the church name at the top.
  • Blessed Hope Church sign is an EPS faux brick & stucco monument with acrylic letters.
  • Chapel in the Pines is a double faced Sandblasted HDU post church sign with gold leaf, and stone effect background.
  • Page Memorial is an HDU monument church sign with appliqued letters.
  • Antioch is a colonial style monument sign with appliqued letters.
  • St Mary Magdaleine is an aluminum internally lit changeable letter sign cabinet in an HDU custom sign.

 

Links to some of the sign styles used to make the signs on this page

 

Church Sign picture Gallery

 

Talk to a Designer Now
1800 948 4307
8:30 - 5:30 pm EST.
Name
Enter your email
Telephone
Tell us about your project

 Help us prevent SPAM!
  
Every custom sandblasted sign, carved sign & routed sign we create is individually designed and made for you. You can request more information for your project using the form above. Or for fast personal service, call one of our designers.
1800 948 4307
 

Featured Sign of the Month

Uwharrie Point Country Club Main Entrance

This PVC Monument Sign is approx 8ft high by 14ft. wide and was originally made from Redwood. After approx 25 years it had rotted. The board of the residents association were very keen to keep the original appearance exactly the same as the original but they wanted it to be from a material that wouldn't rot.  We had access to  the original architects drawings, so we set about converting the plans into a computer file engineered to be made from PVC and aluminum but to look exactly like the original. Every piece of coving and molding was made in house, and then assembled into three pieces which were transported to the site where it was assembled. The whole monument sign was painted with six coats of a high quality Benjamin Moore latex paint ( it lasts longer on PVC than paints costing over $100 .00/gall more. Then apart from the center panel all of the monument was painted once more by brush and as it was drying the brushes were dragged carefully along the length of each section creating a wood grain effect; thus removing any appearance of the sign looking plastic.

uwharrie point entrance sign pvc monument classic signs nc 900x536