Contact

Tell us about your project and how we can assist you.
refresh

Powered by ChronoForms - ChronoEngine.com

 

Signblanks Molded, HDU Signblanks

 

How do I get a wooden sign that will not..... rot, crack, warp, split, blister,bleed or peel and last for more than 50 years?

Easy - use a cast/molded urethane signblank from Classic Signs

 

Classic Signs is unusual in it's ability to mold and cast signs in a couple of different mediums. This page is dedicated to...

Cast/Molded HDU (High Density Urethane) Signblanks

 


aberdeen molded cast signblank hdu stained classic signs nc 180x286All heart vertical grain redwood looks beautiful when sandblasted, and so for many of our signblanks that is what we used to make the masters. From that master a mold is made. We then cast our signblanks either in HDU (high density urethane ) or in solid polyester or solid urethane (depending on the project).

 


theos restaurant cast molded hdu signblank sign classic signs nc 200x150The result is a molded signblank that looks and feels exactly like the original item, down to a microscopic level. It is so exact you cannot tell the difference until you dig into it with a knife.

HDU

It is resistant to heat and cold, it has zero moisture content, and a very low expansion/contraction factor, it won't rot, crack, warp, split, blister, bleed or peel.

Its paint will gradually fade (as all paint does) over time; it ages very gracefully. If it is kept painted it will last indefinitely, that's a very long time so we just claim it will last for 50 years or more.


blue sky camargue cast molded sign classic signs nc 200x150
We have many signs that are now about 23 years old that still look great.

We recommend repainting every 6-10 years to look their best, that's depending on your location the color and type of paint used etc.

For everyday commercial use we recommend our hdu signblanks. (see our gallery)

beach club driftwood molded cast sign blank classic signs nc 220x113It's when we get into more specialized usage that we suggest Polyester molded signs. Anywhere they are in danger of being hit hard; golf balls, animals even vandalism.

Damage by animals is rare but if it occurs its usually where there are no humans, at the far end of a golf course or on a walking or hiking trail. Polyester signblanks are also recommended for traffic signage; Speed limit signs, stop signs etc. Polyester Signblanks

 cordillera custom molded cast hiking trail sign classic signs nc 180x205

I you are in need of a lot of signs for a resort or a golf course or maybe even a walking or hiking trail, we can provide you with the right product at the right price and save you a lot of money.

 Custom molded Signblanks 

golf sign sandblast style custom cast hdu cart crossing sign from classic signs nc200x150 Some signs will always need to be custom made, however once we get to secondary and tertiary signs, street name signs and trail or directional signs, making molds and casting them is practical, attractive and very cost effective.

Plus if the individual sign blanks are lettered using vinyl , when a sign is no longer needed don't throw it away, remove the vinyl letters and reuse it . Recycling at its best and you don't have to buy a new sign.

When we create custom molds for our clients we usually include their logo or emblem in the master sign that we make the mold from. This way your logo is an integral part of every sign.

See video super tough signs

See our gallery of vandal resistant signs

 

 

 

Contact

Tell us about your project and how we can assist you.
refresh

Powered by ChronoForms - ChronoEngine.com

Contact

Tell us about your project and how we can assist you.
refresh

Powered by ChronoForms - ChronoEngine.com

 

Signblanks Molded, HDU Signblanks

 

How do I get a wooden sign that will not..... rot, crack, warp, split, blister,bleed or peel and last for more than 50 years?

Easy - use a cast/molded urethane signblank from Classic Signs

 

Classic Signs is unusual in it's ability to mold and cast signs in a couple of different mediums. This page is dedicated to...

Cast/Molded HDU (High Density Urethane) Signblanks

 


aberdeen molded cast signblank hdu stained classic signs nc 180x286All heart vertical grain redwood looks beautiful when sandblasted, and so for many of our signblanks that is what we used to make the masters. From that master a mold is made. We then cast our signblanks either in HDU (high density urethane ) or in solid polyester or solid urethane (depending on the project).

 


theos restaurant cast molded hdu signblank sign classic signs nc 200x150The result is a molded signblank that looks and feels exactly like the original item, down to a microscopic level. It is so exact you cannot tell the difference until you dig into it with a knife.

HDU

It is resistant to heat and cold, it has zero moisture content, and a very low expansion/contraction factor, it won't rot, crack, warp, split, blister, bleed or peel.

Its paint will gradually fade (as all paint does) over time; it ages very gracefully. If it is kept painted it will last indefinitely, that's a very long time so we just claim it will last for 50 years or more.


blue sky camargue cast molded sign classic signs nc 200x150
We have many signs that are now about 23 years old that still look great.

We recommend repainting every 6-10 years to look their best, that's depending on your location the color and type of paint used etc.

For everyday commercial use we recommend our hdu signblanks. (see our gallery)

beach club driftwood molded cast sign blank classic signs nc 220x113It's when we get into more specialized usage that we suggest Polyester molded signs. Anywhere they are in danger of being hit hard; golf balls, animals even vandalism.

Damage by animals is rare but if it occurs its usually where there are no humans, at the far end of a golf course or on a walking or hiking trail. Polyester signblanks are also recommended for traffic signage; Speed limit signs, stop signs etc. Polyester Signblanks

 cordillera custom molded cast hiking trail sign classic signs nc 180x205

I you are in need of a lot of signs for a resort or a golf course or maybe even a walking or hiking trail, we can provide you with the right product at the right price and save you a lot of money.

 Custom molded Signblanks 

golf sign sandblast style custom cast hdu cart crossing sign from classic signs nc200x150 Some signs will always need to be custom made, however once we get to secondary and tertiary signs, street name signs and trail or directional signs, making molds and casting them is practical, attractive and very cost effective.

Plus if the individual sign blanks are lettered using vinyl , when a sign is no longer needed don't throw it away, remove the vinyl letters and reuse it . Recycling at its best and you don't have to buy a new sign.

When we create custom molds for our clients we usually include their logo or emblem in the master sign that we make the mold from. This way your logo is an integral part of every sign.

See video super tough signs

See our gallery of vandal resistant signs

 

 

 

Contact

Tell us about your project and how we can assist you.
refresh

Powered by ChronoForms - ChronoEngine.com

Gallery

bottom collage Lauren 1a 364x168

Some of what we create on a regular basis

Signs we manufacture are used for but limited to: Business signs, shops signs, restaurant signs, condominium Signs, subdivision signs, golf course signs, street signs, housings development signs, salon signs, beauty parlor signs, real estate signs, commercial signs, industrial signs, house signs, farm signs, beach house signs, resort signs, traffic signs, hotel & inn signs, pub signs, vehicle signs, interior & ada signs, boat signs, truck signs, office signs professional signs, trail signs wall sign, entrance signs, lobby signs, street name signs, outdoor signs, custom signs, mall signs, retail signs , marina signs, architectural signs.

Connect with Us

This email address is being protected from spambots. You need JavaScript enabled to view it.

www.signblasters.com

Like Us on Facebook

Join Us on Googleplus

Youtube Channel

Request a quote !